Code Alarm CA650 Bedienungsanleitung PDF herunterladen (Seite 17)

Negative Lock Output / Positive Unlock Output (GREEN)

Negative Unlock Output / Positive Lock Output (BLUE)

Negative Second Door Unlock Output (LT. GREEN/BLACK Must be changed in programming)

One Wire Positive Multiplexed and One Wire Multiplexed With 2-step Unlock Feature

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock switch.

Verification: This wire will show variable positive voltage when the switch is activated. Please consult the

wire and location chart for specific resistor values for your vehicle.

Driver’s Door Unlock: Locate the unlock motor wire directly from the actuator inside the driver’s door.

Verification: This wire will rest at ground and register positive voltage when the driver’s door is unlocked.

Connect the GREEN and BLUE or LT. GREEN/BLACK wires shown in diagram 14 below using (2) SPDT

relays (not supplied).

Note: When adding the 2 step unlock feature the LT. GREEN/BLACK 2nd door unlock wire will be used to

unlock all vehicle doors on the second press of unlock. An additional SPDT relay (not supplied) is

required. Connect the relay as shown in diagram 15 to unlock the driver’s door on the first press of

unlock.

5. DOOR LOCKS

87a

Fused +12 Volt

B a tte r y S ource

Lock

Unlock

Door

Lock Switch

87a

GR E E N (-) Lock Output

BLUE (-) Unlock Output Or

LT. GREEN/BLACK (-) 2nd

Door Output W hen

Ins talling T he 2-S tep

Unlock Feature

Fused +12 Volt

Battery Source

Resistor

Vehicle Door Lock

Control R elays

Diagram 15

Diagram 14

BLUE (-) Unlock Output

Fused +12 Volt

B a tte ry S ourc e

To Unlock Side Of

Drivers Door Actuator

87a

From Keyless Entry

Module Or Door

Lock/Unlock Relays

1 2 ... 12 13 14 15 16 17 18 19 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

Code Alarm CA650 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Code Alarm CA650