Code Alarm CA650 Bedienungsanleitung PDF herunterladen (Seite 10)

3. 6 PIN AUXILARY HARNESS, CONTINUED

Ignition 3 Output

Accessory 2/3 Output

Fused +12 Volt

Battery Source

87a

BLUE/BLACK Active Outpu

Wire

To Vehicle's 2nd or

3rd Ignition Wire

Jump To PINK

Ignition Output

Wire From

Control Module

Fused +12 Volt

Battery Source

87a

BLUE/BLACK Active Outpu

Wire

To Vehicle's 2nd or 3rd

Accessory Wire

Jump To ORANGE

Accessory Output

Wire From

Control Module

AUX 1 (-) (VIOLET/BLACK)

This wire provides a 500mA negative output capable of driving relays. For control of optional

accessories (i.e. Power Window/Sunroof,etc.).

To Activate press and hold LOCK & TRUNK. Please refer to the selectable options for timing.

Selectable timing: Push & Hold / Press to Latch ON Press to Latch OFF / Press to latch ON and reset

with ignition / Programable 1second to 2 minutes, (see AUX 1 optional timmer programming).

Trunk Release Output (-) 500mA (RED/WHITE)

Locate the vehicle’s trunk release wire at the trunk release switch.

Verification: This wire will register either positive voltage or ground when the trunk release is activated.

Factory Disarm Output (-) (LT. GREEN/BLACK)

This wire provides a (-) 500mA output with the press of UNLOCK, when the remote start feature is

activated and when the trunk feature is activated.

NOTE: This output is programmable to the following options: 2nd Door Unlock, Factory Disarm

(default), Start Status Output.

Ground When Armed Output (-) 500mA (ORANGE)

This wire will show Ground when the system is Armed. This wire is used for starter kill relay or controlling

optional window modules and additional sensors.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Keine Kommentare

Code Alarm CA650 Bedienungsanleitung Seite 10