Code Alarm CA680 Bedienungsanleitung Seite 11
- Seite / 30
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Negative Door Input (GREEN)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register ground (NEG) when the door is opened and the interior light is on. This
wire will register positive voltage when the door is closed and the interior light is off.
Connect the GREEN wire to the vehicle’s negative door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Positive Door Input (PURPLE)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register positive voltage(POS) when the door is opened and the interior light is on.
This wire will register ground or "0" Volts when the door is closed and the interior light is off.
Connect the PURPLE wire to the vehicle’s positive door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Chassis Ground Source (BLACK)
Connect the BLACK wire to a solid chassis ground point using a ring terminal and self tapping screw (not
supplied). Scrape away paint from the grounding point to ensure a good connection. The recommended
grounding point is a metal surface in the driver’s side kick panel area.
Note: Do not ground the BLACK wire with any other vehicle components.
Ground When Armed Output (ORANGE)
This wire will show Ground when the system is Armed. This wire is used for controlling window modules or
additional sensors.
Headlight Output (LT. GREEN/ORANGE)
Locate the vehicle’s headlight wire.
Verification: This wire will register either positive voltage or ground when the headlights are turned on.
Connect the LT. GREEN/ORANGE to the vehicle's headlight wire if the system is negative. (LOW
CURRENT ONLY)
See diagram below when connecting to a Positive Headlight Output:
2. 22 PIN BASE HARNESS CONTINUED
30
87
87a
86
85
GREEN/ORANGE Headlight
Output From Control Module
To Vehicle Headlight
Wire
Fused +12 Volt
Battery Feed
Fused +12 Volt
Battery Feed
- Installation Precautions: 1
- Technical Support 1
- (800) 421-3209 1
- CA 680 SYSTEM LAYOUT 2
- CA 680 System Layout 3
- Fuse Grid 4
- Programming Options 5
- RF Programmer 6
- CA680 - Programming Guide 7
- 1. SETUP & PROGRAMMING 8
- 1. 4 PIN MAIN POWER HARNESS 9
- IMPORTANT! 16
- 6. DOOR LOCKS 20
- 7. ACC. CONNECTOR'S 26
- 8. SYSTEM POWER-UP PROCEDURE 26
- 9. System Testing 27
- 9. System Testing Cont 28
Verwandte Produkte und Handbücher für Auto Alarmanlage Code Alarm CA680
Auto Alarmanlage Code Alarm 4000 Bedienungsanleitung
(116 Seiten)
(116 Seiten)
Auto Alarmanlage Code Alarm 4000 Bedienungsanleitung
(162 Seiten)
(162 Seiten)
Acer Power 5400 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Wewnętrzne dyski twarde Acer Power 5400.
Dostarczamy 1 pdf podręczników Acer Power 5400 do pobrania za darmo według typów dokumentów: Instrukcja Obsługi
Kommentare zu diesen Handbüchern