Code Alarm CA680 Bedienungsanleitung PDF herunterladen (Seite 13)

Negative Unlock Output (GREEN)

Negative Lock Output (BLUE)

Negative Second Door Unlock Output (TAN)

Reverse Polarity (5-Wire Doorlocks) and Reverse Polarity with 2-step Unlock

All Door Lock and Unlock: Locate the lock / unlock wire at the vehicle’s lock / unlock switch.

Verification: These wires will rest at ground and register positive voltage when the Lock and Unlock

switches are activated.

Driver’s Door Unlock: Locate the unlock motor wire directly from the actuator inside the driver’s door.

Verification: This wire will rest at ground and register positive voltage when the driver’s door is unlocked.

Connect the GREEN and BLUE or TAN wires shown in diagram 10 below using (2) SPDT relays (not

supplied).

Note: When adding the 2 step unlock feature the TAN 2nd door unlock wire will be used to unlock all vehicle

doors on the second press of unlock. This feature must be turned on in programming. An additional

SPDT relay (not supplied) is required. Connect the relays as shown in diagram 11 below to unlock the

driver’s door on the first press of unlock

3. DOOR LOCKS

Note. Optional Code Alarm door lock interface part # DLRK is available for this application.

87a

Cut

F us ed +12 Volt

B a tte ry S ource

Lock

Unlock

Mas ter Door

Lock Switch

87a

To Door L ock

Actuators

To Door L ock

Actuators

BLUE (-) Lock Output

GREEN (-) Unlock Output

Or T AN (-) 2nd Door

Unlock Output

F us ed +12 Volt

B a tte ry S ource

Cut

Diagram 10

Diagram 11

87a

To Unlock Side Of

Driver's Door Actuator

Fused +12 Volt

B a ttery S ourc e

From Keyless Entry

Module O r Door

Lock/Unlock Relays

CUT

GR E EN (-) Unlock Output

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Code Alarm CA680 Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Code Alarm CA680