Code Alarm CA100 Bedienungsanleitung PDF herunterladen

APRIL/28/2005

CA100

MODEL CA100

REMOTE CONTROL AUTO ALARM SYSTEM

INSTALLATION & OPERATION INSTRUCTIONS

WIRING DIAGRAM

Main 5 Pin White harness

6 Pin White Mini Connector

Black Antenna Wire

LED Indicator

Valet Switch

Blue Wire: (-) 200mA Unlock Pulse

Green Wire: (-) 200mA Lock Pulse

2 Pin

White

2 Pin

Blue

2 Pin

White

5 Pin

White

6 Pin

White

MAIN 5 PIN WIRE HARNESS:

5. Red Wire: +12V To Constant Battery Source

4. Brown Wire: Positive out

ut To Siren

3. Black Wire: Ground to Vehicle FRAME

2. White Wire: Parking Light Relay Output

1. Red / White Wire: Parking Light Relay Power Input

15A Fuse

6 PIN MINI CONNECTOR WIRE HARNESS:

6. Tan Wire: (-) 200mA Programmable Output

2. Blue Wire: Instant Trigger Ground Input

1. Violet Wire: Positive Door Pin Switch Input

4. Pink Wire: To I

nition Switched + 12V

5. Orange Wire: 200mA Grounded when armed

3. Green Wire: Negative Door Pin Switch Input

87a

Cut

To start solenoidFrom ignition switch

Red wire

White wire

Orange

wire

Channel 3 / 2 Step Door Unlock.

12V

Yellow wire

A. PROGRAMMING TRANSMITTER:

Note:

This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is

exceeded, the security system will start deleting transmitters from memory in chronological order.

1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.

2. Push the Valet switch

times and holding in on

3rd

push until a long chirp is hearing then release the valet

switch. You are now in the Transmitter programming mode.

3. Press and hold any button of the transmitter until the siren responds with a confirming chirp, indicating the

signal has been stored into memory.

4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each transmitter.

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - MODEL CA100

APRIL/28/2005 CA100 1 MODEL CA100 REMOTE CONTROL AUTO ALARM SYSTEM INSTALLATION & OPERATION INSTRUCTIONS WIRING DIAGRAM Main 5 Pin White harne

Seite 2 - III” PRORAMMING:

APRIL/28/2005 CA100 2Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. Three long chirps & Three parking light flashes

Seite 3

APRIL/28/2005 CA100 36. Hit the bumper or strong metal part of the motorcycle to test the threshold level of the sensor. a). Activate the warn-away

Seite 4

APRIL/28/2005 CA100 41. Press button on the transmitter. 2. The siren will chirp twice and parking light will flash twice to indicating that the sec

Seite 5 - APRIL/28/2005

APRIL/28/2005 CA100 5(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfe

Weitere Dokumente für Auto Alarmanlage Code Alarm CA100

Um das Dokument anzuzeigen Code Alarm CA100 Bedienungsanleitung

Code Alarm CA100 Bedienungsanleitung (5 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Code Alarm CA100 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Auto Alarmanlage Code Alarm CA100 herunter. MODEL CA100 REMOTE CONTROL AUTO ALARM SYSTEM Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Auto Alarmanlage Code Alarm CA100

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Code Alarm CA100